Hey hey - when I go to access the PCB json etc I get asked by mashchenko.ca to login...
Is that expected behaviour?
What's on your mind?
TEXT
POLL
Hey hey - when I go to access the PCB json etc I get asked by mashchenko.ca to login...
Is that expected behaviour?
Gathering my bits to build a rail.
I noticed that the Wemos D1 mini has quite a few sheild boards that match many of the functions you build into the custom PCB. I think I'd like to try and build it as a shield stack as much as possible. I need to do some detailed planning I guess.
Is this something you've looked at previously and rejected for *reasons*?
So I've been building and testing along the way. I can't get the display to work and have tried the troubleshooting tips but no luck. I have done a couple of things differently so I was hoping I could get your feedback as to whether these differences should matter. First off I didn't have any 10k ohm resistors on hand - I had some 8.1k and 2.2k so I wired them in series to make 10.3k ohm. I did this everywhere it asked for 10k. I have a large number of capacitors around but no .1uf. or 10uf so I've omitted the capacitors on the backlight line and the reset line. I figured these were just to smooth the current out and wouldn't affect operation but I could be wrong. Any ideas? [edit] - I added the capacitors and it made no difference. I then built a test circuit to see if my 5110s work and they work fine. This is quite frustrating
hi pulsar , this is sudhakar architect , electronic hobist , i have gone through your project it is great , as i am new to coding and scripting , plz guide me how to load all these file into nodemcu v1.0 ,do i have to load all these files into nodemcu or any specific file .
as i want to automate my home , plz do guide me how to start and end through block diagram if possible
my concept:
i have nodemcu 1.0 , 4ch relays ckt board , old window pc win 8.1 with openhab2.1
i wanted to have both control ( wall switch and openhab switch ) , i have enquired so many people in internet but none responded , plz do respond
thank you
my mail id sudhakardotsmsatgmaildotcom
waiting for your reply
This is the place to talk about your favorite topic, to share news, theories, ideas, and to connect with others. The content from your Forum has been converted to Discussions posts, so nothing has been lost.
To learn more about what you can do here, check out community.wikia.com/wiki/Help:Discussions
If you're an admin on this community, read more about how you can customize your Discussions and set up guidelines for contributors: community.wikia.com/wiki/Help:Admin_and_Moderator_Tools_in_Discussions
Have fun!
Update [07.01.2016]: I am releasing a new version of my stacking software, which is ambitiously named "s1.00". It is designed to only work with the newest hardware version, h1.2. This new software and hardware should make the rail much more universal: it now independently operates both camera's shutter and autofocus, so in principle should work as is (or perhaps with slight parameter adjustment in stacker.h) with any camera which has a wired remote shutter connector. The modifications will also likely result in faster maximum shooting speeds attained with your camera: e.g. my Canon 50D can now reliably do at least 30 frames at 4 fps (RAW format), without any perceptible delays at the beginning.
My wiki tutorial has been updated to reflect all the changes:
http://pulsar124.wikia.com/wiki/DIY_automated_macro_rail_for_focus_stacking_based_on_Arduino